How To Clean Your Aircon: DIY Guide – We all love to sleep in our bedroom while it’s hot out because we know how great it feels to wake up in a cool and refreshing environment. We cannot go without our air conditioners with the heat. Aircon units cool your home and provide humidity relief by sending cold air into the atmosphere to maintain healthy humidity levels.
However, air conditioners can’t do their job if they’re not well maintained! Here are some simple steps on how to clean your AC. Read on – How To Clean Your Aircon: DIY Guide
Most aircon units come with a filter that needs to be cleaned or replaced every three months. If you notice your AC isn’t as cold, it might just need some cleaning.
You can find the filters at any hardware store and they should cost less than $5. Head over to your local hardware store and get yourself a new filter.
The most important part of your aircon is the coils. The coils are where the cold air is cooled. You should start by using a vacuum cleaner to remove any dust or debris that’s gathered on the coils.
The first step to cleaning your air conditioner is airing it out. This can be done by opening the window and turning on the AC for a few minutes. Doing so will remove any dust or bacteria that may have accumulated in the unit over time.
The first step to cleaning your AC is to vacuum the filter. The filter absorbs dust, dirt, and other particles in the air that would otherwise flow into your home and make you sick. There should be a small square of fabric or paper at the bottom of your aircon unit; this is where the filter is installed. You can easily remove it with your hand and vacuum the dirt away.
The first and most important step is to clean the fans. These are the parts that push air out of the AC, so it’s imperative to get them thoroughly cleaned. Turn off your AC before you start any work, then remove all of the blades from the fan by carefully pulling them out in a straight line.
Use a small brush to sweep away any dust on the blades and, if you see any debris, use a vacuum cleaner with a brush attachment to clean it up. Clean around each blade using a damp cloth or paper towel to wipe off any dust or grime that may have built up around the edges.
Now it’s time for step two!
The first step in cleaning your AC is to check for leaks. If you notice any, there’s a good chance it boils down to a simple fix. Leaks can happen from time to time and are not always an indication that you need to replace the AC unit entirely.
To check for leaks, find the leaky area and put some soapy water on it. If bubbles appear, you leak!
Alternatively, if you notice white dust coming out of your air conditioner, this also indicates that it needs some TLC.
It is important to regularly clean the inside of your aircon unit. Regularly cleaning your AC will not only remove any dust or other debris that has gathered but will also keep the airflow channels clear and prevent mold from forming.
The best way to clean the inside of an aircon is to use a vacuum cleaner with a long hose attachment. Make sure you don’t use a dry vacuum cleaner, as this can cause damage to the cooling coils.
Then, take a brush and some water and gently scrub any hard-to-reach areas until they are free of dirt and dust. To finish, wipe down the entire interior surface with a cloth dampened in water with vinegar or alcohol added for disinfection purposes.
It’s important to maintain your aircon to ensure that it’s working properly. Without regular maintenance, your aircon will not be able to do its job and could overheat, which can lead to further problems.
These steps are simple enough that you can do them by yourself. The best way to avoid this problem is through regular maintenance! It takes just a few minutes every few months and can save you so much money in the long run.
Luckily, there are plenty of ways to clean your AC. If you’re not sure what you need to do when it comes to aircon maintenance, take a look at this guide for all the information you need. You’ll learn more about why you should clean your AC, what to do if something is wrong with it, and how to keep it running smoothly for years.