How To Whiten Grout Between Tiles? Grout is the material between tiles that gives your floor or wall a smooth, finished look. It can be stained by many things, including dirt and food spills. But it’s not just dirt that causes the grout to darken. Grout is porous, so it absorbs any liquids that come into contact with it, including water.
The best way to whiten grout between tiles depends on how long you’ve had the stains there. If you’ve only had them for a few months, you may be able to remove them with an all-purpose cleaner. If they’ve been there longer than a year or two (or if you don’t want to use chemicals), In this article, we’ll cover information about how to clean and the steps of whitening grout between tiles.
Baking Soda
Baking soda is a great cleaning agent because it’s safe and non-toxic. It can easily remove stains from your tile floors without having any harmful side effects on your family’s health or the environment. Baking soda also removes dirt from hard surfaces such as kitchen counters, bathrooms, and other home areas where water spills may occur frequently.
Baking soda is a cheap alternative that can be used to whiten grout between tiles in your bathroom or kitchen. The baking soda will break down the dirt and mold built up on the grout between your tiles. It will also help remove stains from other things such as tea and coffee.
Here’s how to whiten grout between tiles using baking soda:
- Prepare Your Baking Soda Solution: To prepare your baking soda solution for cleaning grout between tiles, take one cup of water and mix it with two tablespoons of baking soda. The baking soda will act as both an abrasive and cleaning agent.
- Sprinkle Baking Soda on Grout Line: After preparing your baking soda solution, sprinkle it over the grout lines that you want to clean. The grout lines should be wet at this point so that the baking soda sticks to them better and cleans effectively.
- Scrub with Toothbrush or Other Brush: Using toothbrushes scrub the area where you sprinkled baking soda so that it can remove any stains or dirt from the grout line. You may need to repeat this step several times to remove stains from all areas of your grout lines completely.
Vinegar
Vinegar is an acidic solution that can be used to whiten grout between tiles. It is a natural household product that you can find in your kitchen.
It is usually diluted with water before it is used to cleanse the grout between tiles. The strength of the vinegar depends on how dirty your grout is. The stronger the vinegar, the more dirt it will remove from your grout. It works to whiten grout by removing dirt and bacteria from this area of your home. It also loosens up stains in this area of your home and then removes them completely with time.
Steps to whiten grout between tiles:
- Mix equal parts of vinegar, baking soda, and water until the powder dissolves completely.
- Dip a sponge into the mixture and apply it directly onto the grout lines between each tile.
- Let it sit on the area for 10 minutes before scrubbing with an old toothbrush or brush.
- Scrub each area thoroughly until all stain residue has been removed from your grout lines.
- Rinse each area with warm water after scrubbing and allow them to air dry completely.
- Apply any sealer or wax coating onto your newly cleaned grout lines.
Hydrogen Peroxide
Hydrogen peroxide is a bleach that’s safe to use around the house. It’s effective for cleaning and whitening, and it can also be used to bleach hair. You can purchase hydrogen peroxide in drugstores, grocery stores, or online. If you’re making your own, use 3 percent hydrogen peroxide with a few drops of liquid soap.
Hydrogen peroxide works best when combined with an abrasive cleaner like baking soda or cream of tartar. The abrasive cleanser helps break down stains on tiles and grout, while the hydrogen peroxide whitens them up.
Make sure you wear rubber gloves when working with hydrogen peroxide because it will irritate your skin if it comes into contact. You should also avoid using any metal scrubbing pad when cleaning grout because it could scratch the tile surface.
Steps of using hydrogen peroxide to whiten grouts between tiles:
- Mix the hydrogen peroxide with baking soda and water until you get a thick paste that’s not too runny or thick. This should be about the consistency of toothpaste or cream cheese.
- Apply the paste to the stained area and let it sit for 10 minutes. Scrub it with a toothbrush or other small brush until the stain disappears completely. You may have to do this several times if several layers of stain on your grout. But keep reading for some tips on how to make this process easier!
- Use warm water and vinegar (about an equal amount) as an after-cleaner after scrubbing all of the stains out of your grout lines. This will help neutralize any leftover chemicals from cleaning them. Thus, you don’t end up with a new set of stains on top of your old ones!
Lemon Juice
Lemon juice and citrus extract are natural products that work well for whitening grout between tiles. The acidity of these substances breaks down dirt and stains on the surface of the grout, making them easier to rinse away after applying. They also leave behind a pleasant smell that will last for several days after application.
If you want to whiten your grout, here’s how:
- Ensure that all of the tiles are dry before you start this process.
- Use rubber gloves to protect your hands from staining and wear eye protection.
- Pour about 1/2 cup of lemon juice into a bowl (or any other citrus extract). You can also use vinegar if you prefer – make sure that there are no chemicals added.
- Dip a toothbrush into the citrus extract and scrub away at the grout lines between each tile until they appear clean again (this may take some time!).
- Rinse away excess citrus extract using warm water and wipe dry with paper towels.
Oxiclean
The main reason why you should use Oxiclean is that it is non-toxic. This means that it won’t cause any damage to your body or the environment when you use it on your tile floors and walls. It also doesn’t have any strong odors associated with it, so you don’t have to worry about breathing in chemicals while cleaning your house or apartment.
Here are some steps involved in whitening grout between tiles using Oxiclean:
- Pour some Oxiclean into a bucket of warm water. The ratio should be 1 part Oxiclean to 3 parts water.
- Mix the solution until all of the powder has dissolved completely in the water.
- Pour or spray the cleaner onto an old towel or rag and wipe down your tile grout lines. Ensure that you get into all of the nooks and crannies where dirt can hide out!
- Let the solution sit for about 15 minutes on your tiles before rinsing them off with warm water from a hose or bucket; scrubbing gently with a soft bristle brush if necessary to remove any remaining residue.
Final Word
Grout is the material that fills the space between your tiles. It can be a shade of white, gray, or black and serve as an accent to the tile itself. Grout can often become discolored over time due to dirt and stains. This guide shows you how to whiten grout between tiles using everyday household items and some elbow grease.
