How to remove red wine stains on homogeneous tiles? If your beverage of choice is the red wine, the spills while pouring and drinking can present as an issue for cleanliness.
Just like the red wine, there are a lot more items that might be insidiously bad on the cleanliness.
For the red wine, the prompt DIY removal ensures that these stains don’t result in permanent discoloration of the porcelain grout.
Even when the stain gets older, you’ve still got a lot of options through which you can remove it.
The best way to remove the red wine stains would be when there is a fresh spill. The fast action prevents the deep grout staining. People would mostly give preference to bleach as it
Here’s what you can do to get rid of the stain without getting harsh on the homogenous tiles:
For complete removal of stains from the tile, the best idea would be to firstly go with all conventional methods that have been earlier used for flooring cleaning.
When the typical cleaning products don’t work much, then it would be time to consider any of the DIY methods for cleaning the grout surface in the homogenous tiles.
Note: Before you apply such a cleaning solution, you would first need to check on whether the floor manufacturer is offering a removal guide for the tile stain or not.
Also, you need to be sure that the used product (even if you have a DIY solution) is a safe option for floors. Various house products like the vinegar are fine for wreaking havoc on different tile types like marble.
So it would be always best to first check before you apply anything. For the cleaning process, the first thing you must do would be to thoroughly wash the area through the hot water with cleaning products.
When stains still remain there, the best option would be to apply the below DIY remedies.
As cleaning the grout is challenging as it is porous and quickly absorbs stains, removing them becomes a lot more difficult. Let’s get into the method:
Note: Avoid using metal brushes as it starches tile and might even pull out the grout pieces.
Here, you have to fold sandpaper and then rub creased edge along stained grout line, and then go back and forth until you remove the stain completely. Now Rinse the area through hot water.
Get a pencil eraser and now rub this along with strained grout lining, and move it in back and forth motion until you’ve completely removed the stain. Later on, rinse the area through hot water.
This is among the most ideal methods to get porous tiles like marble as you’ll not get use vinegar or various other acidic solutions.
With the empty spray bottles, it’s good to mix a single part peroxide with only two parts of baking soda.
Spray the solution on a stained grout tile area and then scrub area through using a soft brush. Always be sure about using a soft brush on marble or porous tiles so you won’t have to continuously scratch the surface.
You can create a paste and apply this on red wine stains tile grout, and keep on scrubbing area through the soft brush. Always make sure that you’re using a soft brush on porcelain and ceramic tiles so you don’t develop the risk of scratching the surface.
Also, you can form a paste with two parts of baking soda and mixing it with single part water. Now apply this paste to strain, let the solution stay overnight, then scrub wine stain with a soft nylon brush. Now Rinse area through hot water and you’re done!
Whenever you decide on using the above methods for cleaning homogenous tiles and grout, make sure to leave it dry for the next 24 hours.
To get the best protection for the grout, you can also use a silicone-based sealer for resisting stains and repelling dirt. When grout remains in the high-traffic area, you need to be sure to apply a sealer for a minimum of two years.